Top Mistakes to Avoid When Cleaning Mold and Mildew

Top Mistakes to Avoid When Cleaning Mold and Mildew

Top Mistakes to Avoid When Cleaning up Mold
Humans are a species that learns through his mistakes. This has helped us progress
over the centuries to where we are today. It is always better to learn from the mistakes
of others than having to go through the depths and despair of a mistake yourself before
wising up. Proud homeowners who find that they have a mold problem on their hands
might be gung-ho about getting rid of the problem on a Do It Yourself (DIY) basis,
primarily to save cost. If you happen to fall under this category, do take note that other
homeowners in the past who felt the same way have gone through the motions and
made the following mistakes to avoid when it comes to removing mold around the
home.
Gotta Catch Them All!
One of the most common mistakes in cleaning up mold is figuring out that you have
gotten rid of the problem for good. After all, for visible mold that you have just wiped
clean with a tea tree oil solution, there is probably more from where it came from which
remains hidden from your view. After all, mold spores are very small and extremely light
in its makeup. This makes it very easy to spread from one particular area of the home to
another. A single patch of mold growing in one area of the home is enough signal to
perform a thorough inspection of the rest of the house in order to make sure that not a
single nook and cranny remains unlooked at.
Bleach is Not the Answer
Most people think that bleach, with its cleaning power, is able to do wonders when it
comes to getting rid of mold. While bleach is rather effective when it comes to killing and
removing mold from hard and non-porous surfaces, it does not get to the root of the
problem. In order to make a bleach solution more effective, you should perform a mop
up operation using an antimicrobial cleanser.
Painting over Mold
If you think that you are able to slap a coat of mold resistant paint over a patch of
growing mold in order to solve the problem, you are dead wrong. This is the equivalent
of sweeping dirt under the carpet. It provides a temporary cosmetic relief, but over the
course of time, the mold problem will fester and be more difficult to manage. Mold is
able to grow and spread under the coat of paint, and eventually make its presence
known by breaking out. This will also not stop any kind of symptoms related to a mold
infestation since it remains in the vicinity of your living space. Mold resistant paint
should always be applied on surfaces that have had all traces of mold removed in order
to be effective for the future.
Inadequately Cleaning Mold-Infected Materials
It takes a whole lot less effort to remove mold from non-porous materials such as metal,
glass and porcelain as opposed to porous items that come in the form of wood, drywall,
insulation, carpets and soft furnishings. Most of the time, it is advisable to get rid of or
dispose such materials. After all, the cost of cleaning the entire house’s carpeting might
be more than just installing a new carpet layer. Just to make sure that a particular item
can be salvaged, it is best to consult with a professional. If you are in doubt, throw it out,
as it might end up being the source of more mold problems in the future.  Mold Cleanup in Miami
Spread of Mold when Cleaning up
One common rookie mistake that happens each time a homeowner decides to get rid of
the mold problem himself is during the cleaning up process. Without the right mold
containment barriers in place, it is all too easy to spread mold spores in your effort.
While you might find satisfaction in heavy scrubbing of moldy surfaces with a solution of
vinegar and water, or tearing up the moldy carpet on the top floor, these are the very
activities that will disturb dormant mold spores. Such movements will normally spread
the mold spores through the air, allowing them to drift and settle down on previously
unaffected areas of the home. Make sure that you seal off the work area that you have
assigned yourself to by using large sheets of plastic. Not only that, all vents, be they for
heating or cooling purposes, will need to be covered. If possible, ensure that the work
area will have a negative pressure so that all mold spores will remain contained within
that area. Whatever moldy materials that you would like to get rid off should be sealed
in at least two plastic bags prior to shifting it outdoors for disposal. Once you are done
with your mold clean up exercise, remove the outer layer of clothing in the work area
itself and bag it up so that you do not end up being a carrier for mold spores elsewhere
on.
Being Inadequately Attired
Cleaning up mold would mean equipping yourself with the right safety and protective
equipment beforehand. Always make sure that you have a layer of protective clothing: a
full set will normally comprise of rubber gloves, hair and shoe covers, not to mention an
N-95 respiratory mask so that you do not end up inhaling nasty mold spores in the
process.
Last but not Least…
When it comes to water damage repair, water removal, water mitigation, water damage
restoration, water remediation, and removing mold from your property, the
Environmental Protection Agency does recommend obtaining the services of a mold
removal specialist. After all, a small amount of mold, if incorrectly treated, can lead to far
bigger problems in the future. Hence, even after you think you have done a sweet job
removing all signs of mold in and around the house using tried-and- tested home-based
remedies, do contact a professional to perform a thorough inspection of the premises.
Most mold removal specialists will offer a free consultation, and there is nothing quite
like having a professional certify that your premises are officially free from mold
infestation or water damage. To find a mold professional click here
/ Uncategorized

Share the Post

About the Author

Comments

Comments are closed.